Notice

Please be advised you are about to leave the Standards Australia website to proceed to the AustLII website. Click OK to proceed.

Rock on: artificial climbing structures standard revised

July 13, 2021

Statements

  • The newly revised AS 2316.1 series provides greater detail for the safety requirements and test methods for artificial climbing structures and challenge courses in Australia
  • The revision separates the original standard in to three parts, covering belayed climbing and abseiling structures, bouldering structures, and climbing holds

Once a niche sport, the climbing industry in Australia is growing fast in popularity, spanning from professional indoor and outdoor climbers to corporates hosting team building days. For many people looking for a fun and exciting hobby, climbing serves a highly diverse community. Schools even utilise climbing structures to expose students to a new form of mental and physical challenge.

Technical committee SF-047, Artificial Climbing Structures, has recently revised AS 2316.1:2009, Artificial climbing structures and challenge courses – fixed and mobile artificial climbing and abseiling walls, and has released three standards in its place which better articulate test methods for artificial climbing walls, non-belayed climbing walls and climbing holds to provide guidance to designers, manufacturers and facility operators to avoid injuries to climbers.

The primary aim of the committee was to refine wording and include further detail so that the standards can cover any questions manufacturers or operators may have without being misinterpreted.

“The original standard was published at a time when there had been a number of serious accidents. Since the publication of this standard the number of serious accidents has dropped significantly. This is strong evidence of one of the net benefits to Australia of the artificial climbing structures standard,” said David Eager, Professor of Risk Management and Injury Prevention at the University of Technology Sydney, and Committee Chair of SF-047, Artificial Climbing Structures.

“Working with professional engineers, regulators, facility operators and community stakeholders allowed us to separate the standard into three parts, and in doing so, include more detail to specifically set out a minimum safety requirement for climbers, boulderers, belayers and abseilers when using an artificial structure, of all skill levels,” said Professor Eager.

AS 2316.1.1 and AS 2316.1.2 are revisions of the former standard and have been separated to specifically cover belayed and non-belayed structures, while AS 2316.1.3 is an identical adoption of European Standard EN 12572-3:2017 which covers climbing holds. The identical adoption of the European Standard for climbing holds allows Australia to capitalise on the research and testing that has already been completed in Europe.  

Furthermore, a key change to part 2 of the standard series covering bouldering includes a hybrid test method for how bouldering wall impact attenuating mats are tested. With extensive testing already having been completed in Europe, the committee went one step further, factoring in a minimum height of fall, with additional tests on mats to be performed annually.

“With interest in climbing, bouldering and abseiling on the rise in Australia, the AS 2316.1 series of standards shows how experts and stakeholders can work together to create positive change for the climbing industry, providing the guidance needed to assist in building and operating artificial climbing structures, said Roland Terry-Lloyd, Head of Standards Development at Standards Australia.

“This includes looking to international examples to learn and build from and adopt if the benefit for Australians can be seen,” concluded Mr Terry-Lloyd.

The recently published standards are:

Contact
Communications Department
Rock on: artificial climbing structures standard revised
Email and link here
Two people in climbing harnesses ascend a colorful indoor rock climbing wall. The adult on the left wears a blue tank top and black pants, while the child on the right wears a yellow t-shirt and grey pants.
  • The newly revised AS 2316.1 series provides greater detail for the safety requirements and test methods for artificial climbing structures and challenge courses in Australia
  • The revision separates the original standard in to three parts, covering belayed climbing and abseiling structures, bouldering structures, and climbing holds

Once a niche sport, the climbing industry in Australia is growing fast in popularity, spanning from professional indoor and outdoor climbers to corporates hosting team building days. For many people looking for a fun and exciting hobby, climbing serves a highly diverse community. Schools even utilise climbing structures to expose students to a new form of mental and physical challenge.

Technical committee SF-047, Artificial Climbing Structures, has recently revised AS 2316.1:2009, Artificial climbing structures and challenge courses – fixed and mobile artificial climbing and abseiling walls, and has released three standards in its place which better articulate test methods for artificial climbing walls, non-belayed climbing walls and climbing holds to provide guidance to designers, manufacturers and facility operators to avoid injuries to climbers.

The primary aim of the committee was to refine wording and include further detail so that the standards can cover any questions manufacturers or operators may have without being misinterpreted.

“The original standard was published at a time when there had been a number of serious accidents. Since the publication of this standard the number of serious accidents has dropped significantly. This is strong evidence of one of the net benefits to Australia of the artificial climbing structures standard,” said David Eager, Professor of Risk Management and Injury Prevention at the University of Technology Sydney, and Committee Chair of SF-047, Artificial Climbing Structures.

“Working with professional engineers, regulators, facility operators and community stakeholders allowed us to separate the standard into three parts, and in doing so, include more detail to specifically set out a minimum safety requirement for climbers, boulderers, belayers and abseilers when using an artificial structure, of all skill levels,” said Professor Eager.

AS 2316.1.1 and AS 2316.1.2 are revisions of the former standard and have been separated to specifically cover belayed and non-belayed structures, while AS 2316.1.3 is an identical adoption of European Standard EN 12572-3:2017 which covers climbing holds. The identical adoption of the European Standard for climbing holds allows Australia to capitalise on the research and testing that has already been completed in Europe.  

Furthermore, a key change to part 2 of the standard series covering bouldering includes a hybrid test method for how bouldering wall impact attenuating mats are tested. With extensive testing already having been completed in Europe, the committee went one step further, factoring in a minimum height of fall, with additional tests on mats to be performed annually.

“With interest in climbing, bouldering and abseiling on the rise in Australia, the AS 2316.1 series of standards shows how experts and stakeholders can work together to create positive change for the climbing industry, providing the guidance needed to assist in building and operating artificial climbing structures, said Roland Terry-Lloyd, Head of Standards Development at Standards Australia.

“This includes looking to international examples to learn and build from and adopt if the benefit for Australians can be seen,” concluded Mr Terry-Lloyd.

The recently published standards are:

Contact
Communications Department
communications@standards.org.au
communications@standards.org.au
Jess Dunne
Jess Dunne
Communications Manager
+ 61 2 9237 6381
Tanya Brees
Tanya Brees
Chief Marketing Officer
+61 2 9237 6041